Aluminium bridges, designed and built in the EU

Aluminium bridge manufacturer in Vilnius. Pedestrian, cycle and industrial bridges to EN 1090-3 EXC3 and Eurocode 9.
Overzicht

Aluminium bridge manufacturer certified for public tenders

An aluminium bridge, or aluminum bridge in US English, is a crossing whose load-bearing structure is made of aluminium alloy rather than steel, concrete or timber. DR VERSLAS has manufactured these structures in Vilnius since 2009 for municipalities, civil contractors and industrial sites.

Our aluminium fabrication is certified to EN 1090-3, execution class EXC3, under Kiwa certificate 2268-CPR-434. Structural calculations follow Eurocode 9, and each bridge is supplied with its Declaration of Performance and CE marking. Structures are delivered in sections, on a turnkey basis or as supply only. Check the numbers on our certificates page.

Engineer reviewing a 3D aluminium bridge model and structural drawings on screen

Aluminium bridge weight: figures from six delivered structures

The delivered bridges below weighed between 74 and 145 kg per square metre of deck. Weight sets the crane, the transport and the size of the foundations, so it is worth comparing before the design is fixed.

ProjectLengthWidthWeightkg/m² of deckDesign load
Bachstraße, Schwaigern116.6 m4.0 m46.0 t995 kN/m² + 5 t vehicle
Am Stausee, Sohland27.03 m2.5 m5.0 t745 kN/m²
Linteler Kirchweg, Hude22.45 m3.0 m8.5 t1265 kN/m²
Parthe bridge, Leipzig18.4 m3.0 m7.0 t12712 t vehicle
Stadtpark, Doberlug-Kirchhain12.36 m2.0 m2.2 t895 kN/m²
Carl-Metz-Straße, Nußloch8.6 m4.0 m5.0 t1455 kN/m² + 7.5 t vehicle

Deck area is length multiplied by stated width. Figures come from project records of delivered structures. The Parthe figures are as reported by Leipziger Zeitung.

Questions buyers ask an aluminium bridge manufacturer

Who manufactures aluminium bridges in Europe?

DR VERSLAS is a European manufacturer of aluminium bridges, based in Vilnius, Lithuania, with aluminium fabrication certified to EN 1090-3 EXC3. It supplies pedestrian, cycle and industrial bridges with Eurocode 9 calculations and CE marking.

How much does an aluminium footbridge weigh?

On six delivered DR VERSLAS bridges the structure weighed between 74 and 145 kg per square metre of deck. The highest figure belongs to a short, wide bridge designed for a 7.5 t service vehicle.

What certificate should an aluminium bridge manufacturer hold?

The manufacturer should hold a factory production control certificate under EN 1090-1 whose scope names aluminium and the execution class required. For public footbridges that is usually EXC3, the class covered by DR VERSLAS certificate 2268-CPR-434.

Can an aluminium bridge carry service vehicles?

Yes, when it is designed for them. Delivered DR VERSLAS bridges in Schwaigern and Nußloch combine a 5 kN/m² imposed load with service vehicles of 5 t and 7.5 t.

Are aluminium bridges welded or bolted?

Both methods are used. The bridge at Am Stausee in Sohland is fully welded and coated, while the N5 footbridge in Eggenstein-Leopoldshafen is assembled entirely with bolted connections and powder coated.

Referentieprojecten

Delivered aluminium bridges, with client, size and load

Each project page lists the dimensions, load class and construction of the delivered structure.
Materiële onderbouwing

Aluminium versus staal versus beton

Voor bruggen voor voetgangers, fietsers en de meeste toegangsbruggen presteert aluminium beter dan staal en beton op zes van de zeven meetbare parameters. Onderstaande grafiek: 54 m voetgangersbrug, belastingsklasse 5 kN/m².
Structureel Gewicht

Aluminium is 2,5 keer lichter dan staal

tonnen · typische 54 m structuur
Aluminium
12 t
Staal
30 t
Beton
48 t
Aluminium dichtheid 2,7 g/cm³ vs staal 7,85 g/cm³. Echt project: René Brug, Oostenrijk, 55 m aluminium — 21 t vs ~60 t in staal.
Installatietijd

7× snellere installatie ter plaatse

weken op locatie · vanaf levering
Aluminium
2 wk
Staal
8 weken
Beton
14 weken
Prefabricage van aluminium modules arriveert klaar voor installatie. Tijd ter plaatse is voornamelijk heffen, niet fabriceren.
Levenscyclus CO₂ (productie + onderhoud)

62% stoot minder uit dan beton

geïndexeerd · beton = 100% · uitgaande van aluminium met gerecycled materiaal
Aluminium
38%
Staal
85%
Beton
Onafhankelijke LCA van COWI: gerecycled aluminium zorgt voor een CO₂-reductie van ~701 ton ten opzichte van staal. Dit cijfer varieert naargelang het aandeel gerecycled materiaal in het betreffende project.
Herstel aan het einde van de levensduur

95%+ recyclingpercentage in de bouw

% aan materiaalwaarde behouden als gerecycled materiaal
Aluminium
95%
Staal
87%
Beton
25%
IAI (International Aluminium Institute): meer dan 951 ton aluminium in de bouw wordt aan het einde van de levensduur gerecycled. Recycling bespaart 951 ton energie ten opzichte van primaire productie.
Naleving

Tender-gereed documentatie bij elke offerte

Voor gemeentelijke, federale en door de EU gefinancierde oversteekplaatsen is certificering onderdeel van de koopbeslissing. Elke offerte wordt geleverd met het volledige compliancepakket — berekeningen, prestatieverklaringen, BIM-modellen en conformiteitscertificaten.

✓ Actief
Gelaste aluminium constructies
Uitvoeringsklasse EXC2 voor dragende aluminium componenten. CE-gemarkeerde productie.
✓ Actief
Kwaliteitsmanagement
Gedocumenteerde controle tijdens ontwerp, productie en installatie. Jaarlijks gecontroleerd.
✓ Actief
Aluminium constructief ontwerp
EN 1999-1-1, -1-3 toegepast op alle dragende constructies. Berekeningen beschikbaar.
✓ Actief
Prestatieverklaring
Volledige DECLARATIE VAN PRESTATIES documentatie conform de CPR 305/2011 voor elk bouwwerk op de EU-markt.
✓ Actief
Milieubeheer
Levenscyclus CO₂-rapportage en recyclebaarheidsdocumentatie verstrekt per project.
✓ Actief
Las kwaliteit
Volledige kwaliteitseisen voor het lassen van metalen materialen door middel van versmelting.